[DenC]

Hope this is the correct translation... "Static lights Low Beam Assist"... the H7 55w bulb that comes on when turning...

Anybody replaced these with led's? Beside the foglights, these too are not 6000k led's and thus yellowish when they come on.

Any references on which ones to buy?



Bought these foglights after dicussing here... https://www.amazon.com/DDM-Tuning-Headlights-Foglight-Warranty-FBA/dp/B01N9Q5N3L?th=1 ... and they fitted and work perfectly...

 

[Bebop]

Let us know if there is any error if you put in the H7

 

[DenC]

Nobody???

 

[JeauxKing]

I am going to stop and upgrade these tonight. they are almost pointless with how dim they are.

 

[DenC]

I am going to stop and upgrade these tonight. they are almost pointless with how dim they are.

With what? Wich ones??? Bought where??? What did you pay them? Did you need a seperate decoder and/or holder?

 

[Bebop]

Only a regular H7 will fit. The space is too limited to fit anything bigger.

 

[JStewart]

Hope this is the correct translation... "Static lights Low Beam Assist"... the H7 55w bulb that comes on when turning...

Anybody replaced these with led's? Beside the foglights, these too are not 6000k led's and thus yellowish when they come on.

Any references on which ones to buy


Bought these foglights after dicussing here... https://www.amazon.com/DDM-Tuning-Headlights-Foglight-Warranty-FBA/dp/B01N9Q5N3L?th=1 ... and they fitted and work perfectly...

Hello, I purchased the lights that you linked in your post. The lights fit, but I couldn't figure out how to make them lock into place. Any advice?

 

[Bad~Papa]

Hello, I purchased the lights that you linked in your post. The lights fit, but I couldn't figure out how to make them lock into place. Any advice?

They should be keyed and locked in with a quarter turn... here is a link that might help..
https://www.hyundaikonaforum.com/forum/26-electronics/1302-replacing-all-lights.html

 

[cmllr]

By far the most frustrating part of changing out any of the front bulbs - getting them seated and locked in. I have no idea how but one of mine was locked in but off angle a bit - a quick fix but it was not something I expected. You expect 1/4 turn out, replace bulb, 1/4 turn in.

 

[JStewart]

Correct, but the issue I was having is that the base of the light is designed to fit directly into the plug which then locks in with a 1/4 turn. However, the DDM LED lights have the fan at the base of the LED housing with an external plug. Since the light doesn't fit directly into the plug the 1/4 lock method doesn't work as there's just nothing to lock into.. Perhaps I purchased the wrong lights?? I also put DDM LED Raptors in the fog lights and they went in with no issues.

And just to make sure we are on the same page.. I'm trying to swap out the lights that come on when you turn the steering wheel at low speeds. I also wish there was a way to disable the fogs from being turned off when the static turn assist lights come on..

 

[abjbrkt]

Hello, I purchased the lights that you linked in your post. The lights fit, but I couldn't figure out how to make them lock into place. Any advice?

Hope this is the correct translation... "Static lights Low Beam Assist"... the H7 55w bulb that comes on when turning...

Anybody replaced these with led's? Beside the foglights, these too are not 6000k led's and thus yellowish when they come on.

Any references on which ones to buy?



Bought these foglights after dicussing here... https://www.amazon.com/DDM-Tuning-Headlights-Foglight-Warranty-FBA/dp/B01N9Q5N3L?th=1 ... and they fitted and work perfectly...

JStewart did you get H7 or H1 bulbs? The link you quoted takes you to H1???

Here is a similar link that takes you to H7 bulb.
https://www.amazon.com/DDM-Tuning-Headlights-Foglight-Warranty-FBA/dp/B01MXKH48P?th=1&tag=hyundaikonaforumcon-20

 

[abjbrkt]

Only a regular H7 will fit. The space is too limited to fit anything bigger.

These are the ones we use, only 1600 lumens 6000k, which look as bright as the halogens = not bright... I don't care, it was going to be a 6000k bulb or NO bulb, they arn't on the can-bus.
https://www.amazon.com/gp/product/B07FPS35LN/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

 

[JStewart]

The box was marked H7. I wish I had kept the box or taken some pictures, but I've already returned the lights to Amazon. So.. it is possible to convert these turn assist lights to LED, correct? I just have to find the correct lights.. sounds like user error on me haha

 

[JStewart]

Would these work? They are the same H7 socket as the other ones that were linked, but these ones are brighter. I'm not familiar with the can-bus so I'm not sure if these will give me an error code? Can anyone advise, please?

 

[Bebop]

These are the ones we use, only 1600 lumens 6000k, which look as bright as the halogens = not bright... I don't care, it was going to be a 6000k bulb or NO bulb, they arn't on the can-bus.
https://www.amazon.com/gp/product/B07FPS35LN/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

No canbus issue with the turn lights then?

I'll give a try.

thanks.

 

[abjbrkt]

Would these work? They are the same H7 socket as the other ones that were linked, but these ones are brighter. I'm not familiar with the can-bus so I'm not sure if these will give me an error code? Can anyone advise, please?

I tried these, the diameter of the bulb is TO big, wouldn't go in the hole.
https://www.amazon.com/gp/product/B07F4257YM/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

No bulb out warning, ever... even if 1 of the halogen burns out, at least on our US 2018 limited.

 

[hpecs]

Hi can anyone help me.
Just replace my turning ligts assist to led (H7) but now i get a warning that they are not connected and they dont function when turning.
Does anyone know if you have to use specific ones or is it that led lights don't work.
Alos maybe are there brighter lights we could use instead..

 

[Bebop]

Led works, I replaced mine with these.

https://www.amazon.com/H7-Newest-Version-CSP-Chips-Lights/dp/B07FPS35LN/ref=sr_1_5?keywords=LED+h7&qid=1565335847&s=gateway&sr=8-5

 

[abjbrkt]

Hi can anyone help me.
Just replace my turning ligts assist to led (H7) but now i get a warning that they are not connected and they dont function when turning.
Does anyone know if you have to use specific ones or is it that led lights don't work.
Alos maybe are there brighter lights we could use instead..

LED's are polarity specific, take the bulb out, pull it out of the socket, turn 180*, install.

Update us.

 

[hpecs]

LED's are polarity specific, take the bulb out, pull it out of the socket, turn 180*, install.

Update us.

Tried that too going to try different type of leds will keep you posted